Let user reinstall thier own device

-
If you want to let users reinstall thier own device using the your standard OSD tasksequence it is pretty easy.

Requirement: the tasksequence must be deployed to the device as available.

  1. Add a new group at the very top og your tasksequence. Name it eg. Restart in WinPE
  2. Add a condition to run only if <part>ccmexec.exe exits.
  3. Add a restart command, where you configure it to reboot into the tasksequence bootimage
This will make it possible to use the tasksequence for both the bare metal installation and the user initiated reinstall.
The ‘Restart in WinPE’ group will only run if ccmexec.exe exits. (Full OS)

Applications deployed after OSD will be installed, when OSD is done. Therefore advise users to start the reinstall when they are leaving the office.

Ps/
VPN is not supported
Wifi is not supported


Comments

Post a Comment

Popular posts from this blog

SCCM CB Monitoring | Deployment Reporting using SQL

-
I have been look for a way to report deployment status, without using Monitoring | Deployment in the console. The trick was to monitor SMSPROV.LOG while I activated the monitoring  | deployment in the console. After some digging around in the log, I found the select statement below. I have modified it a bit and added some comments. select   all SMS_DeploymentSummary . ApplicationName , SMS_DeploymentSummary . AssignmentID , SMS_DeploymentSummary . CI_ID , SMS_DeploymentSummary . CollectionID , SMS_DeploymentSummary . CollectionName , SMS_DeploymentSummary . CreationTime , SMS_DeploymentSummary . DeploymentID , SMS_DeploymentSummary . DeploymentIntent , SMS_DeploymentSummary . DeploymentTime , SMS_DeploymentSummary . DesiredConfigType , SMS_DeploymentSummary . EnforcementDeadline , SMS_DeploymentSummary . FeatureType , SMS_DeploymentSummary . ModelName , SMS_DeploymentSummary . ModificationTime , SMS_DeploymentSummary . NumberErrors , SMS_Deployme
Read more

Download an appx application locally to be used in SCCM CB

-
Image
Download an appx application locally to be used in SCCM CB I got some inspiration to this blogpost from: http://woshub.com/how-to-download-appx-installation-file-for-any-windows-store-app/ Here is an easy way to download an appx from Microsoft store. This can be used to add an appx application in SCCM CB and the distribute it to devices. Why all this hazzle, when you can get the app from the store? Quite simple: our company policy don't allow app update over the Internet Requirement: The application must be installed, to be able to copy the download link. Next: Search for the application and chose share. (Sorry for the danish. Lommeregner = Calculator) In the share dialog box, select copy link Browse to this URL:  https://store.rg-adguard.net/  and paste the URL into the textbox Find lines with the version number you would like to download and place them all in the same folder. Also download the files for x86 & x64 or an easier way...
Read more

Pxeboot over slow line - speed it up

-
Image
Playing around with TFTPWindowsSize  can result in faster pxeboot process over a slow line. One of my colleagues has optimized the pxeboot process by adjusting the TFTPWindowsSize. In our case the load of the pxe wim vent down from 20 min to 2 min. The default value i 1, and the test ended with 16. it migth be required with some test in your environment to find the "right" value for you. The change did not impact the pxe process on VMWare. PS/ Do not change the TFTPBlocksize, this will break the pxe process! Next step will bo to implement BranchCache, to get additional performance improvements
Read more